Beyond selectivity: Are behavioral avoidance and hormesis likely causes of pyrethroid-induced outbreaks of the southern red mite Oligonychus ilicis?

Secondary pest outbreak is a counterintuitive ecological backlash of pesticide use in agriculture that takes place with the increase in abundance of a non-targeted pest species after pesticide application against a targeted pest species. Although the phenomenon was well recognized, its alternative causes are seldom considered. Outbreaks of the southern red mite Oligonychus ilicis are frequently reported in Brazilian coffee farms after the application of pyrethroid insecticides against the coffee leaf miner Leucoptera coffeella. Selectivity favoring the red mite against its main predatory mites is generally assumed as the outbreak cause, but this theory has never been tested. Here, we assessed the toxicity (and thus the selectivity) of deltamethrin against both mite species: the southern red mite and its phytoseid predator Amblyseius herbicolus. Additionally, behavioral avoidance and deltamethrin-induced hormesis were also tested as potential causes of red mite outbreak using free-choice behavioral walking bioassays with the predatory mite and life-table experiments with both mite species, respectively. Lethal toxicity bioassays indicated that the predatory mite was slightly more susceptible than its prey (1.5×), but in more robust demographic bioassays, the predator was three times more tolerant to deltamethrin than its prey, indicating that predator susceptibility to deltamethrin is not a cause of the reported outbreaks. The predator did not exhibit behavioral avoidance to deltamethrin; however insecticide-induced hormesis in the red mite led to its high population increase under low doses, which was not observed for the predatory mite. Therefore, deltamethrin-induced hormesis is a likely cause of the reported red mite outbreaks.     

Determination of anti-anxiety and anti-epileptic drugs in hospital effluent and a preliminary risk assessment

In this study, an analytical methodology was developed for the determination of psycho-active drugs in the treated effluent of the University Hospital at the Federal University of Santa Maria, RS – Brazil. Samples were collected from point A (Emergency) and point B (General effluent). The adopted methodology included a pre-concentration procedure involving the use of solid phase extraction and determination by liquid chromatography coupled to mass spectrometry. The limit of detection for bromazepam and lorazepam was 4.9 ± 1.0 ng L⁻¹ and, for carbamazepine, clonazepam and diazepam was 6.1 ± 1.5 ng L⁻¹. The limit of quantification was 30.0 ± 1.1 ng L⁻¹, for bromazepam, clonazepam and lorazepam; for carbamazepine was 50.0 ± 1.8 ng L⁻¹ and was 40.0 ± 1.0 ng L⁻¹ for diazepam. The mean concentrations in the Emergency and General effluent treated currents were as follows: for bromazepam, 195 ± 6 ng L⁻¹ and 137 ± 7 ng L⁻¹; for carbamazepine, 590 ± 6 ng L⁻¹ and 461 ± 10 ng L⁻¹; for diazepam, 645 ± 1 ng L⁻¹ and 571 ± 10 ng L⁻¹; for lorazepam, 96 ± 7 ng L⁻¹ and 42 ± 4 ng L⁻¹; and for clonazepam, 134 ± 10 ng L⁻¹ and 57 ± 10 ng L⁻¹. A preliminary risk assessment was conducted: carbamazepine and diazepam require considerable attention owing to their environmental toxicity. The occurrence of these psychoactive-drugs and the environmental risks that they pose demonstrated the need for a more efficient treatment system. As far we are aware, there have been no comparable studies to this on the hazards of hospital effluents in Brazil, and very few that have carried out a risk assessment of psycho-active drugs in hospital effluent in general.     

Impact of long‐term pesticide applications on some soil biological parameters

Abstract

The soil oxidative and anaerobic processes, as well as, the microbial biomass were followed during three years in a cotton farm (Tatuí) where the recommended pesticides have been used for several years, and in an experimental field (São Paulo) treated first time with the same pesticides. The oxidative process was monitored by the dehydrogenase (DHA)‐activity using triphenyltetrazolium chloride (TTC) as substrate. The anaerobic process was followed by the iron‐oxide reduction, and the microbial biomass was estimated by the substrate (glucose)‐indiced respiration. Increases in DHA‐activity and in the microbial biomass occurred only in the farm soil, with concomitant decreases in iron‐reduction. In the experimental field soil, the increases in DHA‐activity were followed only by decreases in iron‐reduction. Soil characteristics were the determining factor for different biological parameters after pesticide inputs. All the pesticides produced at least one clear but transient effect.     

Relationship Between Biogenic Amines and Free Amino Acid Contents of Wines and Musts from Alentejo (Portugal)

The concentration of biogenic amines and free amino acids was studied in 102 Portuguese wines and 18 musts from Alentejo demarcated (D.O.C.) regions. Most wines were commercial, except for 38 monovarietals obtained by micro vinification. Musts from the varieties used to produce the latter wines were also studied. Both biogenic amines and free amino acids were analyzed by HPLC using fluorescence detection for their o-phthalaldehyde/fluorenylmethyl chloroformate (OPA/FMOC) derivatives. The most significant amines (average 10.8 mg/L for histamine+tyramine in red, and 7.4 mg/L for white wines) were found to be present at low levels and, although no important relationship between each individual biogenic amine could be obtained, the total amine content depends significantly on the assimilable amino acid content in wine.     

Geochemical assessment of metal concentrations in sediment core of Korangi Creek along Karachi Coast, Pakistan

Sediment core from Korangi Creek, one of the polluted coastal locations along the Karachi Coast Pakistan, was collected to trace the history of marine pollution and to determine the impact of industrial activity in the area. Down core variation of metals such as Ca, K, Mg, Al, S, Ti, V, Cr, Mn, Fe, Ni, Cu and Zn was studied in the 72.0 cm core. Nuclear analytical techniques, proton induced X-rays emission (PIXE), was employed to ascertain the chemical composition in sediment core. Grain size analysis and sediment composition of cored samples indicated that Korangi creek sediments are clayey in nature. Correlation matrix revealed a strong association of Ni, Cu, Cr and Zn with Fe and Mn. To infer anthropogenic input, enrichment factor (EF), degree of contamination and pollution load index were calculated. EF showed severe enrichment in surface sediment for Ni, Cu, Cr and Zn, indicating increased industrial effluents discharge in recent years. The study suggests that heavy metal discharge in the area should be regulated. If the present trend of enrichment is allowed to continue unabated, it is most likely that the local food web complexes in the creek might be at highest risk.     

Distribution of radionuclides in surface soils, Singhbhum Shear Zone, India and associated dose

Gamma emitters were estimated in surface soils from a mineralized zone in Eastern India using high purity Germanium detector-based high resolution gamma spectrometry system. Activities of ²³⁸U, ²²⁶Ra, ²³²Th, ²³⁵U, ²²⁷Th, ^234mPa, ²¹⁰Pb, ⁴⁰K, and ¹³⁷Cs were 79?±?50, 81?±?53, 65?±?23, 4?±?2, 5?±?4, 92?±?50, 97?±?45, 517?±?201, and 4?±?2 Bq/kg, respectively. Most radionuclides were observed to follow log-normal distribution. The correlation between physicochemical properties of the samples, like pH, organic matter content, particle size, and moisture content were also studied. Activity ratios of ²²⁶Ra/²³⁸U, ²¹⁰Pb/²²⁶Ra, and ²²⁷Th/²³⁵U indicated deviation from secular equilibrium in some samples. The associated annual effective dose ranged from 0.07 to 0.24 mSv and the mean was calculated to be 0.12?±?0.04 mSv for this region, indicating it to be one of normal natural background radiation.     

Estimating the concentration of indoor particles of outdoor origin: A review

Recent toxicological results highlight the importance of separating exposure to indoor- and outdoor-generated particles, due to their different physicochemical and toxicological properties. In this framework, a number of studies have attempted to estimate the relative contribution of particles of indoor and outdoor origins to indoor concentrations, using either statistical analysis of indoor and outdoor concentration time-series or mass balance equations. The aim of this work is to review and compare the methodologies developed in order to determine the ambient particle infiltration factor (F _INF) (i.e., the fraction of ambient particles that enter indoors and remains suspended). The different approaches are grouped into four categories according to their methodological principles: (1) steady-state assumption using the steady-state form of the mass balance equation; (2) dynamic solution of the mass balance equation using complex statistical techniques; (3) experimental studies using conditions that simplify model calculations (e.g., decreasing the number of unknowns); and (4) infiltration surrogates using a particulate matter (PM) constituent with no indoor sources to act as surrogate of indoor PM of outdoor origin. Examination of the various methodologies and results reveals that estimating infiltration parameters is still challenging. The main difficulty lies in the separate calculation of penetration efficiency (P) and deposition rate (k). The values for these two parameters that are reported in the literature vary significantly. Deposition rate presents the widest range of values, both between studies and size fractions. Penetration efficiency seems to be more accurately calculated through the application of dynamic models. Overall, estimates of the infiltration factor generated using dynamic models and infiltration surrogates show good agreement. This is a strong argument in favor of the latter methodology, which is simple and easy to apply when chemical speciation data are available.

Implications: ?Taking into account that increased health risks may be related with ambient particles, a reliable estimation of the main parameters governing ambient particle infiltration indoors may assist towards the development of appropriate regulation and control measures, targeted to specific sources/factors contributing to increased exposures. The overall study of the methodological approaches estimating particle infiltration indoors suggests that dynamic models provide a more complete and realistic picture of ambient particle infiltration indoors, whereas the use of specific PM constituents to act as surrogates of indoor particles of outdoor origin seems also a promising new methodology.     

Assessing heavy metal pollution in the recent bottom sediments of Mabahiss Bay, North Hurghada, Red Sea, Egypt

Thirty-nine samples of recent bottom sediments were collected from Mabahiss Bay, north of Hurghada City, Red Sea, Egypt. The collected samples were subjected to a total digestion technique and analyzed by absorption spectrometer for metals including Pb, Zn, Cd, Ni, Co, Cu, and Mn. Concentration data were processed using correlation analysis, principal component analysis, and hierarchical cluster analysis. Multivariate statistical analysis classified heavy metals in the study area into different groups. The pollution level attributed to these metals was evaluated using geoaccumulation index and contamination factor in order to determine anthropogenically derived sediment contamination. The results of both geoaccumulation index and contamination factor results reveal that the study area is not contaminated with respect to Zn, Ni, Cu, and Mn; uncontaminated to moderately contaminate with Pb; and moderately to strongly contaminate with Cd. The high contents of Pb, Cd, and Co in the study area result from various anthropogenic activities including dredging, land filling, localized oil pollution, using of antifouling and anticorrosive paints from fishing and tourist boats, and sewage discharging from various sources within the study area.     

Statistical apportionment and risk assessment of selected metals in sediments from Rawal Lake (Pakistan)

The present study was carried out in order to evaluate the statistical apportionment and risk assessment of selected metals (Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Pb, Sr, and Zn) in freshly deposited sediments in Rawal Lake, Pakistan. Composite sediment samples were collected, oven-dried, grounded, homogenized, and processed to assess the water-soluble and acid extractable concentrations of the metals in the water extract and acid extract of the sediments using flame atomic absorption spectrophotometer. Statistical methods were used to identify the possible sources of the metals. Sediment quality guidelines and potential acute toxicity were used to evaluate the ecotoxicological sense of selected metals. Non-carcinogenic health risk assessment was also carried out to determine the potential adverse health risks to the inhabitants. Relatively higher concentration was noted for Ca, Fe, Mg, Na, K, Mn, and Sr in the sediment samples. Principal component analysis and cluster analysis revealed anthropogenic contributions of Cd, Pb, Cr, Mn, Fe, and Li in the sediments. Enrichment factors of the metals in sediments showed severe to moderate enrichment of Cd, Pb, Ca, Fe, Li, Mn, and Sr. Geoaccumulation indices and contamination factors evidenced significant contamination by Cd and Pb, although, on the whole, low degree of contamination was noted. The levels of some metals exceeded the sediment quality guidelines, which revealed frequently adverse biological effects to the dwelling biota in the aquatic ecosystem. The sediments were found to be significantly contaminated by Cd, Pb, Cr, Mn, Fe, and Li.